Orion A10E - Configuring Basic Qos; Checking Configurations; Default Configurations of Basic Qos; Enabling Global Qos

Orion Networks
A10E/A28E/A28F Configuration Guide
4 QoS
Orion Networks
102
4.2 Configuring basic QoS
4.2.1 Preparing for configurations
Scenario
Quality of Service (QoS) enables the carrier to provide different service quality for different
applications, and assign and schedule different network resources.
Prerequisite
N/A
4.2.2 Default configurations of basic QoS
The default configuration of basic QoS is as below.
Function
Default value
Global QoS function status
Enable
4.2.3 Enabling global QoS
Enable global QoS function for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mls qos enable
Enable global QoS.
4.2.4 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show mls qos
Show global QoS status.