Orion A10E - Checking Configurations; Configuring Aging Time of Dynamic ARP Entries; Configuring Dynamic ARP Entry Learning Mode; Maintenance

Orion Networks
A10E/A28E/A28F Configuration Guide
3 IP services
Orion Networks
74
Step
Configuration
Description
2
Alpha-A28E(config)#arp ip-
address mac-address
Configure static ARP table entry.
3.1.5 Configuring aging time of dynamic ARP entries
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#arp
aging-time period
(Optional) configure dynamic ARP entry
learning mode. The value 0 indicates no
aging.
3.1.6 Configuring dynamic ARP entry learning mode
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#arp
mode { learn-all | learn-
reply-only }
(Optional) configure dynamic ARP entry
learning mode.
3.1.7 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show arp
Show information about ARP address table.
2
Alpha-A28E#show arp ip-
address
Show ARP table information related to
specified IP address.
3
Alpha-A28E#show arp ip
if-number
Show ARP table information related to Layer
3 interface.
4
Alpha-A28E#show arp
static
Show ARP statistics.
3.1.8 Maintenance
Maintain the A10E/A28E as below.