Orion A10E - Checking Configurations; Maintenance

Orion Networks
A10E/A28E/A28F Configuration Guide
8 OAM
Orion Networks
279

If there is no MEP configured in service instance, Traceroute unsuccessfully
because of fail to find source MEP;

If assigned source MEP is invalid, Traceroute unsuccessfully. For example,
assigned source MEP is not existing or CFM of the source MEP interface is
disabled;

If assigning destination MEPID to perform Traceroute operation, Traceroute
unsuccessfully when fail to find destination MEP MAC address according to
MEPID;

If CC function is not effective, configure static RMEP and assign MAC address to
ensure Layer 2 traceroute operating successfully;

Operation unsuccessful if other users are using the assigned source MEP to
perform Traceroute operation.
8.2.9 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show ethernet cfm
Show CFM global configuration.
2
Alpha-A28E#show ethernet cfm
domain [ level level ]
Show MD and service instance
configuration.
3
Alpha-A28E#show ethernet cfm
errors [ level level ]
Show error CCM database information.
4
Alpha-A28E#show ethernet cfm
local-mp [ interface port
port - id | level level ]
Show Ethernet locked signals.
5
Alpha-A28E#show ethernet cfm
remote-mep [ static ]
Show local MEP configuration.
7
Alpha-A28E#show ethernet cfm
remote-mep [ level level
[ service name [ mpid local -
mep-id ] ] ]
Show static RMEP information.
8
Alpha-A28E#show ethernet cfm
traceroute-cache
Show RMEP discovery information.
9
Alpha-A28E#show ethernet cfm
traceroute-cache
Show database trace route information.
8.2.10 Maintenance
Maintain the A10E/A28E as below.
Command
Description
Alpha-A28E(config)#clear ethernet cfm
errors [ level level ]
Clear CCM error database
information.
Alpha-A28E(config)#clear ethernet cfm
remote-mep [ level level ]
Clear RMEP.
Alpha-A28E(config)#clear ethernet cfm
traceroute-cache
Clear traceroute cache database.