A10E/A28E/A28F Configuration Guide
Alpha-A28E#show interface port
port-id
statistics dynamic [ detail ]
Show interface statistics.
Alpha-A28E#show interface port
[
port-
id
] flowcontrol
Show flow control on the
interface.
Alpha-A28E#show system mtu
Alpha-A28E#show combo description port
[
port-id
]
Show information about the
Combo interface.
Alpha-A28E#show combo configuration
port [
port-id
]
Show configurations of the
Combo interface.
Alpha-A28E#show sfp detect-mode port
[
port-id
]
Show detection mode of the
SFP interface.
1.7 Configuring basic information
Configure the A10E/A28E as below.
(Optional) configure device name.
By default, the device name is Alpha-A28E.
The system supports changing device name to make users
distinguish different devices in the network. Device name
become effective immediately, which can be seen in terminal
prompt.
Alpha-
A28E#language
{ chinese |
english }
(Optional) configure switchover language mode.
By default, the language is English.
The system supports displaying help and prompt information
is both English and Chinese.
Save configuration information to the A10E/A28E after
configuration, and the new saved configuration information
will cover the original configuration information.
Without saving, the new configuration information will lose
after rebooting, and the A10E/A28E will continue working
with the original configuration.
Use the command of erase file-name to delete the
configuration file. This operation cannot be restored,
so use this command with care.
To Next Page
Loading...