Orion A10E - Figure 9-12 Configuring Extended OAM to Manage the Remote Device; Maintenance; Example for Configuring Extended OAM to Manage the Remote Device

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
331
No.
Item
Description
1
Alpha-A28E(config-remote)#show
remote-device information
Show basic information about the
remote device.
2
Alpha-A28E#show extended-oam
status [ port-list port-list ]
Show extended OAM link status.
8
Alpha-A28E(config-remote)#show
vlan basic-information
Show basic information about
VLANs on the remote device.
9
Alpha-A28E(config-remote)#show
vlan group-information { all |
group-id }
Show information about VLAN
groups on the remote device.
10
Alpha-A28E#show extended-oam
statistics [ port-list port-
list ]
Show statistics of extended OAM
frames.
11
Alpha-A28E#show snmp trap remote
Show Trap enabling status on the
remote device.
9.5.19 Maintenance
Maintain the A10E/A28E as below.
Item
Description
Alpha-A28E(config)#clear extended-oam
statistics [ port-list port-list ]
Clear statistics of extended OAM
packets.
9.5.20 Example for configuring extended OAM to manage the
remote device
Networking requirements
As shown below, the RC551E is connected to the switch. Configured with extended OAM,
the switch can remotely manage the RC551E. Configure the host name and IP address of the
RC551E on the switch.
Figure 9-12 Configuring extended OAM to manage the remote device