Orion A10E - Configuring Dynamic Secure MAC Address; Configuring Sticky Secure MAC Address

Orion Networks
A10E/A28E/A28F Configuration Guide
6 Security
Orion Networks
156
6.2.6 Configuring dynamic secure MAC address
Configure dynamic secure MAC address for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-
A28E(config)#port-
security aging-time
period
(Optional) configure the aging time of
dynamic secure MAC address.
3
Alpha-
A28E(config)#interface
port port-id
Enter physical layer interface configuration
mode.
4
Alpha-A28E(config-
port)#switchport port-
security
Enable dynamic secure MAC learning.
5
Alpha-A28E(config-
port)#switchport port-
security trap enable
(Optional) enable port security MAC Trap.
The switchport port-security command can enable port security MAC and dynamic
secure MAC learning at the same time.
6.2.7 Configuring Sticky secure MAC address
Configure Sticky secure MAC address for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
port port-id
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#switchport port-security
(Optional) enable port security
MAC.
4
Alpha-A28E(config-
port)#switchport port-security
mac-address sticky mac-address
vlan vlan-id
Manually configure Sticky secure
MAC learning.
Note