Orion A10E - Command Line Shortcuts

Orion Networks
A10E/A28E/A28F Configuration Guide
1 Basic configurations
Orion Networks
9
Mode
Enter method
Description
Service instance
configuration
In global configuration mode,
input the service cisid level level
command.
Alpha-A28E(config-
service)#
MST region
configuration
In global configuration mode,
input the spanning-tree region-
configuration command.
Alpha-A28E(config-
region)#
Profile configuration
In global configuration mode,
input the igmp filter profile
profile-number command.
Alpha-A28E(config-
igmp-profile)#
Cluster configuration
In global configuration mode,
input the cluster command.
Alpha-A28E(config-
cluster)#
1.2.4 Command line shortcuts
The A10E/A28E supports the following command line shortcuts:
Shortcut
Description
Up cursor key (↑)
Show previous command if there is any command input
earlier; the display has no change if the current command is
the earliest one in history records.
Down cursor key (↓)
Show next command if there is any newer command; the
display has no change if the current command is the newest
one in history records.
Left cursor key (←)
Move the cursor one character to left; the display has no
change if the cursor is at the beginning of command.
Right cursor key (→)
Move the cursor one character to right; the display has no
change if the cursor is at the end of command.
Backspace
Delete the character before the cursor; the display has no
change if the cursor is at the beginning of command.
Tab
Click Tab after inputting a complete keyword, cursor will
automatically appear a space to the end; click Tab again, the
system will show the follow-up inputting keywords.
Click Tab after inputting an incomplete keyword, system
automatically executes partial helps:

System take the complete keyword to replace input if the
matched keyword is the one and only, and leave one word
space between the cursor and end of keyword;

In case of mismatch or matched keyword is not the one and
only, display prefix at first, then click Tab to check words
circularly, no space from cursor to the end of keyword, click
Space key to input the next word;

If input incorrect keyword, click Tab will change to the
next line and prompt error, the input keyword will not
change.