Orion A10E - Checking Configurations; Maintenance

Orion Networks
A10E/A28E/A28F Configuration Guide
6 Security
Orion Networks
182
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
port port-id
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-port)#dot1x
timer reauth-period reauth-
period
Configure the time of the re-
authentication timer.
4
Alpha-A28E(config-port)#dot1x
timer quiet-period quiet-period
Configure the time of the quiet
timer.
5
Alpha-A28E(config-port)#dot1x
timer tx-period tx-period
Configure the time of the
transmission timeout timer.
6
Alpha-A28E(config-port)#dot1x
timer supp-timeout supp-timeout
Configure the time of the supplicant
authorization timeout timer.
7
Alpha-A28E(config-port)#dot1x
timer server-timeout server-
timeout
Configure the time of the
Authentication server timeout timer.
6.7.7 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show dot1x port-
list port-list
Show interface 802.1x configurations.
2
Alpha-A28E#show dot1x port-
list port-list statistics
Show interface 802.1x statistics.
3
Alpha-A28E#show dot1x port-
list port-list user
Show user information of interface
802.1x authentication.
6.7.8 Maintenance
Maintain the A10E/A28E as below.
Command
Description
Alpha-A28E(config)#clear dot1x port-list
port-list statistics
Clear interface 802.1x statistics.