A10E/A28E/A28F Configuration Guide
4.3.6 Creating traffic policy
Configure to create traffic policy on the A10E/A28E as below.
Enter global configuration mode.
Alpha-A28E(config)#policy-map
policy-map-name
Create traffic policy and enter traffic
policy pmap configuration mode.
Alpha-A28E(config-
pmap)#description
string
(Optional) configure traffic policy
information.
4.3.7 Defining traffic policy mapping
Define one or more defined traffic classifications to one traffic policy.
Configure to define traffic policy mapping on the A10E/A28E as below.
Enter global configuration mode.
Alpha-
A28E(config)#policy-map
policy-map-name
Create traffic policy and enter traffic policy
pmap configuration mode.
Alpha-A28E(config-
pmap)#class-map
class-
map-name
Bind traffic classification into traffic policy;
only apply traffic policy to packets matching
with traffic classification.
At least one rule is necessary for traffic
classification to bind traffic policy,
otherwise the binding will fail.
4.3.8 Defining traffic policy operations
Define different operations to different flows in policy.
Configure to define traffic policy operation on the A10E/A28E as below.
Enter global configuration mode.
To Next Page
Loading...