Orion A10E - Configuring Cos to Local Priority; Configuring Mapping from DSCP to Local Priority; Configuring Mapping from Local Priority to DSCP

Orion Networks
A10E/A28E/A28F Configuration Guide
4 QoS
Orion Networks
109
Step
Configuration
Description
3
Alpha-A28E(config-port)#mls qos
port-priority priority
Configure default priority on the
interface.
4
Alpha-A28E(config-port)#mls qos
trust { cos | dscp | port-
priority }
Configure priority type of interface
trust.
4.4.4 Configuring CoS to local priority
Configure mapping CoS to local priority for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mls qos mapping
cos cos-value to localpriority
priority
Create mapping from CoS to local
priority.
4.4.5 Configuring mapping from DSCP to local priority
Configure mapping from DSCP to local priority for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mls qos
mapping dscp dscp-value to
local-priority priority
Create mapping from DSCP to local
priority.
4.4.6 Configuring mapping from local priority to DSCP
Configure mapping from local priority to DSCP for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#policy-map
policy-map-name
Create traffic policy and enter traffic
policy pmap configuration mode.
3
Alpha-A28E(config-pmap)#class-
map class-map-name
Bind traffic classification with traffic
policy, and apply traffic policy to those
packets that match traffic classification.
4
Alpha-A28E(config-pmap-c)#set
local-priority priority
Alpha-A28E(config-pmap-c)#exit
Alpha-A28E(config-pmap)#exit
Configure local priority in pcmp-c
mode, and return to global configuration
mode.