Orion A10E - Configuring MAC Address Learning; Configuring Multicast Filtering Mode for MAC Address Table

Orion Networks
A10E/A28E/A28F Configuration Guide
2 Ethernet
Orion Networks
37
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mac-address-
table static unicast mac-address
vlan vlan-id port port-id
Configure static unicast MAC
addresses.
Alpha-A28E(config)#mac-address-
table static multicast mac-
address vlan vlan-id port-list
port-list
Configure static multicast MAC
addresses.
3
Alpha-A28E(config)#mac-address-
table blackhole { destination |
source } mac-address vlan vlan-
id
Configure blackhole MAC
addresses.

The MAC address of the source device, multicast MAC address, FFFF.FFFF.FFFF,
and 0000.0000.0000 cannot be configured as static unicast MAC address.

The maximum number of static unicast MAC addresses supported by the
A10E/A28E is 1024.
2.1.5 Configuring multicast filtering mode for MAC address table
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mac-address-
table multicast filter-mode
{ filter-all | forward-all |
filter-vlan vlan-list }
Configure multicast filtering mode
of MAC address table.
2.1.6 Configuring MAC address learning
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#mac-address-
table learning { enable |
disable } port-list { all |
port-list }
Enable/Disable MAC address
learning.