Orion A10E - Creating SLA Operations; Default Configurations of SLA

Orion Networks
A10E/A28E/A28F Configuration Guide
8 OAM
Orion Networks
284
8.3.3 Default configurations of SLA
Function
Default value
SLA scheduling status
Disable
SLA Layer 2 operation CoS
Level 0
SLA jitter operation detection interval
1s
Number of SLA jitter operation detection packets
10
Life period of SLA scheduling operation
forever
Test period of SLA scheduling operation
300s
8.3.4 Creating SLA operations
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration
mode.
2
Alpha-A28E(config)#sla oper-num
y1731-echo remote-mep mep-id level
level svlan vlan-id [ cvlan vlan-
id ] [ cos cos-value ]
Configure SLA y1731-jitter
operation according to the
destination MEP ID.
3
Alpha-A28E(config)#sla oper-num
y1731-jitter remote-mep mep-id
level level svlan vlan-id [ cvlan
vlan-id ] [ cos cos-value ]
[ interval period ] [ packets
packets-num ]
Configure SLA y1731-jitter
operation according to the
destination MEP.
4
Alpha-A28E(config)#sla oper-num
icmp-echo dest-ipaddr ip-address
[ dscp dscp-value ]
Configure basic information
about SLA icmp-echo
operation.
5
Alpha-A28E(config)#sla oper-num
icmp-jitter dest-ipaddr ip - address
[ dscp dscp-value ] [ interval
period ] [ packets packets-num ]
Configure basic information
about SLA icmp-jitter
operation.
6
Alpha-A28E(config)#sla y1731-echo
quick-input [ level level ]
[ svlan vlan-id ]
Quickly create an y1731-echo
operation.
7
Alpha-A28E(config)#sla y1731-
jitter quick-input [ level level ]
[ svlan vlan-id ]
Quickly create an y1731-jitter
operation.