A10E/A28E/A28F Configuration Guide
Alpha-
A28E#reboot
[ now ]
(Optional) configure reboot options.
When the A10E/A28E is in failure, please reboot it to solve
the problem according to actual condition.
Alpha-
A28E#erase
[
file-name
]
(Optional) delete files saved in the memory.
1.8 Task scheduling
When you need to use some commands periodically or at a specified time, configure task
scheduling.
The A10E/A28E supports realizing task scheduling by combining the program list to
command line. You just need to designate the task start time, period and end time in the
program list, and then bind the program list to command line so as to realize the periodic
operation of command line.
Configure task scheduling for the A10E/A28E as below.
Enter global configuration
mode.
Alpha-A28E(config)#schedule-list
list-
number
start { date-time
month
-
day
-
year
hour
:
minute
:
second
[ every { day | week |
period
hour
:
minute
:
second
} ] stop month-
day-year
hour
:
minute
:
second
| up-time
period
hour
:
minute
:
second
[ every
period
hour
:
minute
:
second
] [ stop
period
hour
:
minute
:
second
] }
Create and configure
schedule list.
Alpha-A28E(config)#
command-string
schedule-list
list-number
Bind the command line
which needs periodic
execution and supports
schedule list to the
schedule list.
Alpha-A28E#show schedule-list [
list-
number
]
Show configurations of
the schedule list.
1.9 Watchdog
The interference of outside electromagnetic field will influence the working of single chip
microcomputer, and cause program fleet and dead circulation so that the system cannot work
normally. Considering the real-time monitoring to the running state of single chip
To Next Page
Loading...