A10E/A28E/A28F Configuration Guide
Alpha-A28E(config)#mls qos
mapping local-priority
priority
to dscp
dscp-value
Create mapping from local priority to
DSCP.
4.4.7 Configuring all-traffic modification on the interface
Configure the A10E/A28E as below.
Enter global configuration mode.
Alpha-A28E(config)#mls qos
mapping local-priority
to dscp
enable
Enable mapping from local priority to
DSCP.
Alpha-A28E(config)#mls qos
non-modify port
port-list
Configure the port list for disabling all-
traffic modification.
4.4.8 Configuring specific-traffic modification
Configure the A10E/A28E as below.
Enter global configuration mode.
Alpha-A28E(config)#policy-map
policy-map-name
Create traffic policy and enter traffic
policy pmap configuration mode.
Alpha-A28E(config-pmap)#class-
map
class-map-name
Bind traffic classification with traffic
policy, and apply traffic policy to those
packets that match traffic classification.
Alpha-A28E(config-pmap-
c)#modify enable
Enable specific-traffic modification.
4.4.9 Configuring CoS copying
Configure the A10E/A28E as below.
Enter global configuration mode.
Alpha-A28E(config)#interface
port
port-id
Enter physical layer interface
configuration mode.
Alpha-A28E(config-
port)#switchport qinq dot1q-
tunnel
(Optional) enable basic QinQ functions.
To Next Page
Loading...