Orion A10E - Checking Configurations; Configuring IGMP Filtering; Preparing for Configurations

Orion Networks
A10E/A28E/A28F Configuration Guide
5 Multicast
Orion Networks
132
Step
Configuration
Description
5
Alpha-
A28E(config)#mvr
proxy source-ip ip-
address
(Optional) configure the source IP address for the
IGMP querier to send query packets.
6
Alpha-A28E(config)#ip
igmp querier query-
interval period
(Optional) configure IGMP query interval.
7
Alpha-
A28E(config)#mvr
proxy query-max-
response-time period
(Optional) configure the maximum response time
to send query packets.
8
Alpha-
A28E(config)#mvr
proxy last-member-
query period
(Optional) configure the interval for last member
to send query packets.
When IGMP Proxy is disabled, the following parameters of MVR Proxy can be
configured: source IP address, query interval, maximum response time to send
Query packets, and interval for last member to send Query packets. After IGMP
Proxy is enabled, these configurations will take effect immediately.
5.4.4 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show mvr proxy
Show configurations of IGMP Proxy.
2
Alpha-A28E#show ip igmp
querier vlan
Show user VLAN information to be queried.
5.5 Configuring IGMP filtering
5.5.1 Preparing for configurations
Scenario
The different users in the same multicast group receive different multicast requirements and
permissions, and allow configuring filtering rules on the switch which connects multicast
router and user host so as to restrict multicast users. The maximum number of multicast
groups allowed for users to join can be set.