Orion A10E - Checking Configurations; Configuring Keepalive; Default Configurations of Keepalive

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
301
Prerequisite

Configure the IP address of the SNMP interface.

Configure basic functions of SNMP. SNMP v1 and v2c need to configure the community
name; SNMP v3 needs to configure the user name and SNMP view.

Configure the routing protocol and ensure that the route between the A10E/A28E and
NMS is reachable.
9.2.3 Default configurations of KeepAlive
The default configuration of KeepAlive is as below.
Function
Default value
KeepAlive Trap
Disable
KeepAlive Trap period
300s
9.2.4 Configuring KeepAlive
Configure KeepAlive for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#snmp-
server keepalive-trap
enable
Enable KeepAlive Trap.
3
Alpha-A28E(config)#snmp-
server keepalive-trap
interval period
(Optional) configure the period for
sending KeepAlive Trap.
To avoid multiple devices sending KeepAlive Trap at the same time according to the
same period and causing heavy network management load, the real transmission
period of KeepAlive Trap is timed as period+5s random transmission.
9.2.5 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show keepalive
View KeepAlive configurations.