Orion A10E - Checking Configuration; Maintenance

Orion Networks
A10E/A28E/A28F Configuration Guide
5 Multicast
Orion Networks
135
Configuring the maximum multicast group number in the VLAN
Configure the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode
2
Alpha-A28E(config)#ip igmp
max-group max-group vlan
vlan-id
Configure the maximum multicast group
number allowed in the VLAN.
3
Alpha-A28E(config)#ip igmp
max-group action { deny |
replace } vlan vlan-id
(Optional) configure the action when the
number of groups exceeds the maximum
multicast group number allowed in the
VLAN.
By default, there is no limit on the multicast group number. The action for the
maximum multicast group is deny.
5.5.7 Checking configuration
Check configuration result by the following commands.
No.
Item
Description
1
Alpha-A28E#show ip igmp filter
[ interface-type interface-number |
vlan [ vlan - id ] ]
Show application information
about IGMP filtering.
2
Alpha-A28E#show ip igmp profile
[ profile-number ]
Show configurations of IGMP
profile filtering rules.
5.6 Maintenance
Item
Description
Alpha-A28E(config)#clear mvr interface-
type [ interface-number ] statistics
Clear MVR statistics on the
interface.