Orion A10E - Checking Configurations; Example for Outputting System Logs to Log Server; Figure 9-13 Outputting System Logs to Log Servers

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
338
Step
Configuration
Description
5
Alpha-A28E(config)#logging file
(Optional) output system
logs to the Flash of the
A10E/A28E.
Only warning-level logs are
available.
9.7.6 Checking configurations
Use the following commands to check configuration results.
No.
Item
Description
1
Alpha-A28E#show
logging
Show system log configurations.
2
Alpha-A28E#show
logging file
Show system log contents.
9.7.7 Example for outputting system logs to log server
Networking requirements
As shown in Figure 9-13, configure system log to output system logs of the switch to the log
server, facilitating view them at any time.
Figure 9-13 Outputting system logs to log servers
Configuration steps
Step 1 Configure the IP address of the switch.
Alpha-A28E#config
Alpha-A28E(config)#interface ip 0
Alpha-A28E(config-ip)#ip address 20.0.0.6 255.0.0.0 1
Alpha-A28E(config-ip)#exit
Step 2 Output system logs to the log server.
Alpha-A28E(config)#logging on
Alpha-A28E(config)#logging time-stamp date-time