Orion A10E - Figure 6-10 Configuring IP Source Guard

Orion Networks
A10E/A28E/A28F Configuration Guide
6 Security
Orion Networks
189
Figure 6-10 Configuring IP Source Guard
Configuration steps
Step 1 Set Port 1 to a trusted interface.
Alpha-A28E#config
Alpha-A28E(config)#interface port 1
Alpha-A28E(config-port)#ip verify source trust
Alpha-A28E(config-port)#exit
Step 2 Configure the static binding relationship.
Alpha-A28E(config)#ip verify source
Alpha-A28E(config)#ip source binding 10.10.10.1 port 2
Step 3 Enable global dynamic IP Source Guard binding.
Alpha-A28E(config)#ip verify source dhcp-snooping
Checking results
Show static binding table configurations by the command of show ip source binding.
Alpha-A28E#show ip source binding
History Max Entry Num: 1