Orion A10E - Configuring MTU for the Remote Device; Configuring Remote Host Name

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
320
Step
Configuration
Description
3
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.
4
Alpha-A28E(config-
remote)#show oam capability
Show remote device extended OAM
management capacity.
9.5.8 Configuring remote host name
Whether the remote device supports this function varies with the specific remote
device. For details, see the corresponding manuals.
Configure the CO device as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-
A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.
4
Alpha-A28E(config-
remote)#hostname hostname
Configure remote host name.
9.5.9 Configuring MTU for the remote device
Whether the remote device supports this function varies with the specific remote
device. For details, see the corresponding manuals.
Configure the remote device as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-
A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.
4
Alpha-A28E(config-
remote)#system mtu size
Configure MTU for the remote device.