Orion A10E - Configuring STP Parameters; Enabling STP

Orion Networks
A10E/A28E/A28F Configuration Guide
7 Reliability
Orion Networks
226
Function
Default value
hello-time timer
2s
forward-delay timer
15s
7.4.4 Enabling STP
Configure STP on the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#spanning-tree
enable
Enable STP.
7.4.5 Configuring STP parameters
Configure STP enable for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#spanning-tree
priority priority-value
(Optional) configure device
priority.
3
Alpha-A28E(config)#spanning-tree
root { primary | secondary }
(Optional) configure the
A10E/A28E as the root or backup
device.
4
Alpha-A28E(config)#interface port
port-id
Alpha-A28E(config-port)#spanning-
tree priority priority-value
(Optional) configure device
interface priority.
5
Alpha-A28E(config-port)#spanning-
tree inter-path-cost cost-value
Alpha-A28E(config-port)#exit
(Optional) configure interface path
cost.
6
Alpha-A28E(config)#spanning-tree
hello-time value
(Optional) configure Hello Time.
7
Alpha-A28E(config)#spanning-tree
transit-limit value
(Optional) configure maximum
transmitting speed of interface.
8
Alpha-A28E(config)#spanning-tree
forward-delay value
(Optional) configure forward
delay.
9
Alpha-A28E(config)#spanning-tree
max-age value
(Optional) configure maximum
age.