Orion A10E - Configuring ARP; Figure 3-1 Configuring ARP Networking Application

Orion Networks
A10E/A28E/A28F Configuration Guide
3 IP services
Orion Networks
75
Command
Description
Alpha-A28E(config)#clear
arp
Clear all entries in ARP address mapping table.
3.1.9 Configuring ARP
Networking requirements
As shown in Figure 3-1, the A10E/A28E connects to host, connects to the upstream router by
Port 1. IP address of Router is 192.168.1.10/24, subnet mask is 255.255.255.0. MAC address
is 0050-8d4b-fd1e.
To improve communication security between Device and Router, you need to configure
related static ARP table entry on the A10E/A28E.
Figure 3-1 Configuring ARP networking application
Configuration steps
Step 1 Create an ARP static entry.
Alpha-A28E#config
Alpha-A28E(config)#arp 192.168.1.10 0050.8d4b.fd1e
Checking results
Use the show arp command to check whether all the table entry information in ARP address
mapping table is correct.