Orion A10E - Enabling Global IGMP Snooping; Optional) Enabling IGMP Snooping on Vlans; Configuring the Multicast Router Interface

Orion Networks
A10E/A28E/A28F Configuration Guide
5 Multicast
Orion Networks
125
5.2.3 Enabling global IGMP Snooping
Step
Function
Default value
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#ip igmp
snooping
Enable global IGMP Snooping.
5.2.4 (Optional) enabling IGMP Snooping on VLANs
When global IGMP Snooping is enabled, IGMP Snooping is enabled on all VLANs by default.
In this situation, you can disable or re-enable IGMP Snooping on a VLAN in VLAN
configuration mode.
When global IGMP Snooping is disabled, IGMP Snooping is disabled on all VLANs by
default. In this situation, you cannot enable IGMP Snooping on a VLAN.
Configuring IGMP Snooping in VLAN configuration mode
In VLAN configuration mode, you can enable IGMP Snooping on only one VLAN at a time.
Step
Function
Default value
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#vlan vlan-id
Enable VLAN configuration
mode.
3
Alpha-A28E(config-vlan)#ip igmp
snooping
Enable IGMP Snooping on a
VLAN.
Configuring IGMP Snooping in global configuration mode
In VLAN configuration mode, you can enable IGMP Snooping on multiple VLANs at a time.
Step
Function
Default value
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#ip igmp
snooping vlan-list vlan-list
Enable IGMP Snooping on
VLANs.
5.2.5 Configuring the multicast router interface
Step
Function
Default value
1
Alpha-A28E#config
Enter global configuration mode.