A10E/A28E/A28F Configuration Guide
Figure 6-5 Configuring TACACS+
Configuration steps
Authenticate login users through TACACS+.
Alpha-A28E#tacacs-server 192.168.1.1
Alpha-A28E#tacacs-server key alpha-a28e
Alpha-A28E#user login tacacs-user
Alpha-A28E#enable login local-tacacs
Checking results
Show TACACS+ configurations by the command of show tacacs-server.
Alpha-A28E#show tacacs-server
Server Address: 192.168.1.1
Backup Server Address: --
Sever Shared Key: alpha-a28e
Total Packet Sent: 0
Total Packet Recv: 0
Accounting server Address: --
Backup Accounting server Address: --
6.6 Storm control
In most Layer 2 network, the unicast traffic is much larger than the broadcast traffic. If rate
for broadcast traffic is not limited, when a broadcast storm is generated, a number of
To Next Page
Loading...