Orion A10E - Configuring Remote Network Management

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
326
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.
4
Alpha-A28E(config-
remote)#download { bootstrap
| system-boot | fpga } file-
name
Download the system bootstrap file,
system startup file, and FPGA file from
the CO device to the remote device.
5
Alpha-A28E(config-
remote)#download startup-
config [ file-name ]
Download configuration files from the
CO device to the remote device.
On the remote device, download files from the CO device to the remote device as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#download { bootstrap |
system-boot | fpga } file-
name
Download the system bootstrap file,
system startup file, and FPGA file from
the CO device to the remote device.
4
Alpha-A28E(config-
port)#download startup-config
[ file-name ]
Download configuration files from the
CO device to the remote device.
9.5.13 Configuring remote network management
Whether the remote device supports this function varies with the specific remote
device. For details, see the corresponding manuals.
Configuring remote network management
Configure the CO device as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
port port-id
Enter physical layer interface
configuration mode.
3
Alpha-A28E(config-
port)#remote-device
Enter remote configuration mode.