Orion A10E - Example for Configuring Basic Functions of LLDP; Maintenance

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
313
No.
Item
Description
1
Alpha-A28E#show lldp local
config
Show LLDP local configurations.
2
Alpha-A28E#show lldp local
system-data [ port-list port-
id ]
Show LLDP local system information.
3
Alpha-A28E#show lldp remote
[ port-list port-id ]
[ detail ]
Show LLDP neighbor information.
4
Alpha-A28E#show lldp
statistic [ port-list port-
id ]
Show LLDP packet statistics.
9.4.9 Maintenance
Maintain the A10E/A28E as below.
No.
Command
Description
1
Alpha-A28E(config)#clear lldp
statistic [ port-list port-id ]
Clear LLDP statistics.
2
Alpha-A28E(config)#clear lldp remote-
table [ port-list port-id ]
Clear LLDP neighbor
information.
9.4.10 Example for configuring basic functions of LLDP
Networking requirements
As shown in Figure 9-10, switches are connected to the NView NNM system. Enable LLDP
on links between Switch A and Switch B. And then you can query the Layer 2 link changes
through the NView NNM system. If the neighbour is aged, the neighbour is added, or the
neighbour information changes, Switch A and Switch B sends LLDP alarm to the NView
NNM system.