Orion A10E - Page 31

Orion Networks
A10E/A28E/A28F Configuration Guide
1 Basic configurations
Orion Networks
11

Input a command and followed by a "?" after one character space, if the position of "?" is
keyword, list all keyword and brief description.
Alpha-A28E(config)#ntp ?
The command output is as below.
peer Configure NTP peer
refclock-master Set local clock as reference clock
server Configure NTP server

Input a command and followed by a "?" after one character space, if the position of "?" is
parameter, list the range and brief description.
Alpha-A28E(config)#interface ip ?
The command output is as below.
<0-14> IP interface number
Partial help
You can get partial help in the below three conditions:

Input a character string and start with a "?", the A10E/A28E will list all keywords
starting with the character string under current mode.
Alpha-A28E(config)#c?
The command output is as below.
class-map Set class map
clear Clear screen
console-cli Console CLI
cpu Configure cpu parameters
create Create static VLAN

Input a command and followed by a character string with "?", the A10E/A28E will list
all keywords start with the character string in the command of current mode.