Orion A10E - Page 136

Orion Networks
A10E/A28E/A28F Configuration Guide
4 QoS
Orion Networks
116
Step 3 Configure to take SP+WRR queue schedule on Port 1 egress direction.
SwitchA(config)#mls qos queue wrr 1 1 20 1 1 50 0 0
Checking results
Show interface priority trust mode.
SwitchA#show mls qos port 2
Port Priority Trust Flow Modify
-----------------------------------------------------------
2 0 Cos Enable
…
Check whether mapping relationship between Cos priority and local priority is correctly
configured.
SwitchA#show mls qos mapping cos
CoS-LocalPriority Mapping:
CoS: 0 1 2 3 4 5 6 7
----------------------------------------------
LocalPriority: 0 1 2 3 5 6 6 7
SwitchA#show mls qos mapping localpriority
LocalPriority-Queue Mapping:
LocalPriority: 0 1 2 3 4 5 6 7
----------------------------------------------------
Queue: 1 2 3 4 5 6 7 8
Check whether queue scheduling is correctly configured on the interface.
SwitchA#show mls qos queue
Queue Weight(WRR)
-------------------------
1 1
2 1
3 20
4 1
5 1
6 50
7 0
8 0