A10E/A28E/A28F Configuration Guide
Alpha-A28E(config)#mvr vlan 3
Alpha-A28E(config)#mvr vlan 3 group 234.5.6.7
Alpha-A28E(config)#mvr vlan 3 group 225.1.1.1
Step 4 Enable MVR Proxy.
Alpha-A28E(config)#mvr proxy
Alpha-A28E(config)#mvr proxy suppression
Alpha-A28E(config)#ip igmp querier enable
Alpha-A28E(config)#mvr proxy source-ip 192.168.1.2
Step 5 Configure source interface information.
Alpha-A28E(config)#interface port 1
Alpha-A28E(config-port)#mvr type source
Alpha-A28E(config-port)#switchport mode trunk
Alpha-A28E(config-port)#switchport trunk native vlan 3
Alpha-A28E(config-port)#switchport trunk untagged vlan 12,13
Step 6 Configure receiving interface information.
Alpha-A28E(config)#interface port 2
Alpha-A28E(config-port)#mvr type receiver
Alpha-A28E(config-port)#switchport mode trunk
Alpha-A28E(config-port)#switchport trunk native vlan 12
Alpha-A28E(config-port)#switchport trunk untagged vlan 3
Alpha-A28E(config-port)#exit
Alpha-A28E(config)#interface port 3
Alpha-A28E(config-port)#mvr type receiver
Alpha-A28E(config-port)#switchport mode trunk
Alpha-A28E(config-port)#switchport trunk native vlan 13
Alpha-A28E(config-port)#switchport trunk untagged vlan 3
Checking result
Check whether MVR configurations on the switch are correct.
Alpha-A28E#show mvr
MVR Running: Enable
MVR Multicast VLAN(ref):3(2)
MVR Max Multicast Groups: 3840
MVR Current Multicast Groups: 2
To Next Page
Loading...