Orion A10E - Page 363

Orion Networks
A10E/A28E/A28F Configuration Guide
9 System management
Orion Networks
343
Configure Traceroute for the A10E/A28E as below.
Step
Configuration
Description
1
Alpha-A28E#config
Enter global configuration mode.
2
Alpha-A28E(config)#interface
ip if-number
Enter Layer 3 interface configuration
mode.
3
Alpha-A28E(config-ip)#ip
address ip-address [ ip-
mask ] vlan-id
Configure the IP address of the
interface.
4
Alpha-A28E(config-ip)#exit
Alpha-A28E(config)#ip
default-gateway ip-address
Configure the default gateway.
5
Alpha-A28E(config)#exit
Alpha-A28E#traceroute ip-
address [ firstttl first-
ttl ] [ maxttl max-ttl ]
[ port port-id ] [ waittime
second ] [ count times ]
Test the connectivity of the IPv4
network, and show nodes passed by
the packet.