A10E/A28E/A28F Configuration Guide
The card cannot start up in order.
Before upgrading system software by BootROM, you should build FTP environment, take the
PC as FTP server and the A10E/A28E as client. Basic requirements are as below.
Configure FTP server, make sure the server is available.
Configure IP address for TFTP server; keep it in the same network segment with
A10E/A28E IP address.
Steps for upgrading system software by BootROM:
Log in device through serial port as administrator and enter Privileged EXEC
mode, reboot the A10E/A28E by the command of reboot.
Alpha-A28E#reboot
Please input 'yes' to confirm:yes
Rebooting ...
Click Space key to enter interface when the display shows "Press space into
Bootstrap menu...", then input "?" to display command list:
[Alpha-A28E]:?
? - List all available commands
h - List all available commands
V - Show bootstrap version
b - Boot an executable image
E - Format both DOS file systems
T - Download system program
u - XMODEM download system boot image
N - set ethernet address
R - Reboot
The input letters are case sensitive.
To Next Page
Loading...