– 124 – NWA-008845-001 Rev.5.0
32ch1002.fm
(3) ANI Assignment
DESCRIPTION DATA
Assign requiring of ANI Signal from T1
network when an incoming call terminates.
(1)
(2)
472
0: Available
Assign the Signal Pattern received from T1
network.
• When the Signal Pattern from T1 network is
FGD-Format: Assign the data to “NONE”.
• When the Signal Pattern from T1 network is
ANI-Format: Assign the data to
“02”. NOTE
•
(1)
(2)
Y=3
00: Signal Pattern from T1 Network
NONE : ANI + Called No.
02 : ANI
Assign the number of digits of Called Number
received from T1 network.
•
(1)
(2)
Y=1
2: Number of Digits of Called No.
NONE : No data
01-31 : 1-31 digits
Assign the signal kind of Called Number sent
from T1 network.
NOTE: • When the Signal Pattern from T1
network is FGD-Format: Assign
the data to “1”.
• When the Signal Pattern from T1
network is ANI-Format: Assign
the data to “0”.
•
(1)
(2)
Y=A
17: Signal Kind of Called No. NOTE
0: DP
1: DTMF
Assign the ACK-WINK Signal to be sent to
the DTI when the signal kind of Called from
T1 network is MF Signal.
NOTE: • When the Signal Pattern from T1
network is FGD-Format: Assign
the data to “0”.
• When the Signal Pattern from T1
network is ANI-Format: Assign
the data to “1”.
•
(1)
(2)
Y=A
16: Sending of ACK-WINK Signal on Re-
ceiving MF Signal NOTE
0: To send
1: Not sent
START
CM08
CM31
INITIAL
INITIAL
A
JULY/01/2006
AUTOMATIC NUMBER IDENTIFICATION (ANI)
To Next Page
Loading...