Philips Sopho 2000 IPS - Page 143

– 125 – NWA-008845-001 Rev.5.0
32ch1002.fm
DESCRIPTION DATA
Assign the ACK-WINK Signal to be sent to
the DTI when the signal kind of called number
received from T1 network is DP Signal.
NOTE: • When the Signal Pattern from T1
network is FGD-Format: Assign
the data to “1”.
• When the Signal Pattern from T1
network is ANI-Format: Assign
the data to “0”.
•
(1)
(2)
Y=A
18: Sending of ACK-WINK Signal on
Receiving DP Signal NOTE
0: To send
1: Not sent
Assign the number of digits of ANI received
from T1 network.
•
(1)
(2)
Y=1
3: ANI Digits from T1 Network
NONE : No data
01-31 : 1-31 digits
Assign the number of digits to be deleted from
ANI, if required.
< An example of FGD Format >
•
(1)
(2)
Y=A
14: Number of Deleting Digits from ANI
NONE : No digit deletion
00 : No digit deletion
01-10 : Leading one digit deletion-
Leading 10 digits deletion
Assign whether ANI is sent to the OAI
terminal or not.
(1)
(2)
462: Sending ANI to OAI terminal
0: To send
1: Not sent
Assign whether ANI is sent to the SMDR
terminal or not.
(1)
(2)
463: Sending ANI to SMDR terminal
0: To send
1: Not sent
A
CM31
INITIAL
Received digits:
Key Pulse + XX + 1234567890 + Stop Pulse
ANI (10 digits)
Information digits (2 digits)
• 2 digits deletion
• Identification on the terminal:
10 digits (ANI)
CM08
END
AUTOMATIC NUMBER IDENTIFICATION (ANI)