– 144 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Select the trunk route seized for Call Forward-
ing-No Answer-Outside.
(1)
(2)
600
0 : By calling party’s tenant/terminating
trunk’s tenant
1 : By Call Forwarding setting station’s
tenant
Assign Call Forwarding-No Answer keys to
the D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0016: Call Forwarding-No Answer Set/
Cancel
For setting the same key as Call Forwarding-
Busy Line
(1)
(2)
My Line No. + + Key No.
F0012: Call Forwarding-No Answer/Busy
Line Set/Cancel
Provide Call Forwarding feature with each ten-
ant as per incoming call type.
•
•
•
(1)
(2)
Y=23 Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
1 : Call Forwarding
Specify the timing of Call Forwarding-No An-
swer for a tie line incoming call.
[Series 3200 R6.2 software required]
(1)
(2)
126
0 : As per timing for internal call or an as-
sisted call
1 : As per timing for trunk incoming call
NOTE: The timing for a tie line incoming call is set as following data.
When CM08>126:0 is set:
When CM08>126:1 is set:
B
CM08
CM90
,
,
CM65
CM08
2ND DATA OF CM13 Y=46 TIMING FOR TIE LINE INCOMING CALL
0 As per CM41 Y=0>101
1 As per CM41 Y=0>15
2ND DATA OF CM13 Y=46 TIMING FOR TIE LINE INCOMING CALL
0 As per CM41 Y=0>100
1 As per CM41 Y=0>01
END
CALL FORWARDING
CALL FORWARDING-NO ANSWER
To Next Page
Loading...