– 467 – NWA-008845-001 Rev.5.0
32ch1008.fm
To add Automatic Number Identification (ANI) information to the MCI message format when the ANI in-
formation is sent from the network, do the following programming.
DESCRIPTION DATA
Provide sending of ANI information from net-
work to the VMS with MCI.
•
(1)
(2)
Y=138
00-63: Trunk Route No.
0: To send
For MCI with MP, specify the MCI message
format sent to the VMS from the MP RS-232C
port as Format with ANI.
(1)
(2)
709
0: Format with ANI
C
CM35
CM08
END
MESSAGE CENTER INTERFACE (MCI)
PROGRAMMING
To Next Page
Loading...