– 469 – NWA-008845-001 Rev.5.0
32ch1008.fm
To add Automatic Number Identification (ANI) information to the MCI message format when the ANI in-
formation is sent from the network, do the following programming.
DESCRIPTION DATA
Provide sending of ANI information from net-
work to the VMS with MCI.
•
(1)
(2)
Y=138
00-63: Trunk Route No.
0: To send
For MCI with AP00, specify the message for-
mat sent to the VMS with MCI as Format with
ANI.
(1)
(2)
36
1: Format with ANI
E
CM35
CMD001
END
MESSAGE CENTER INTERFACE (MCI)
PROGRAMMING
To Next Page
Loading...