Getting Started
R&S
®
FSW
58User Manual 1173.9411.02 ─ 43
Main power switch function:
Position 1: The instrument is in operation.
Position O: The entire instrument is disconnected from the AC power supply.
For details, refer to Chapter 5.1.1.4, "Connecting the AC Power", on page 28.
5.2.2.3 DISPLAY PORT and DVI
You can connect an external monitor or other display device to the R&S FSW to pro-
vide an enlarged display. Two different types of connectors are provided for this pur-
pose:
●
DISPLAY PORT
●
DVI (Digital visual interface)
For details, see Chapter 5.1.4, "Connecting an External Monitor", on page 36.
5.2.2.4 LAN
The LAN interface can be used to connect the R&S FSW to a local network for remote
control, printouts or data transfer. The assignment of the RJ-45 connector supports
twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded twisted pair, and STP for shielded twisted pair).
For details, see Chapter 13, "Network and Remote Operation", on page 730.
5.2.2.5 USB
The rear panel provides four additional female USB (USB-A) connectors to connect
devices like a keyboard, a mouse or a memory stick (see also Chapter 5.2.1.5, "USB",
on page 49).
Furthermore, a male USB DEVICE connector (USB-B) is provided, for example to con-
nect the R&S FSW to a PC for remote control.
All USB connectors support standard 2.0.
5.2.2.6 Bandwidth Extension Options with IF WIDE OUTPUT Connector
You can extend the signal analysis bandwidth of the R&S FSW by a hardware option
(R&S FSW-B160/-B320-B512 or R&S FSW-U160/-U320/-U512). The bandwidth exten-
sion allows for an output sample rate of up to 10 GHz and a linear bandwidth up to:
●
160 MHz (with option B160/U160)
●
320 MHz (with option B320/U320)
●
512 MHz (with option B512/U512)
While the extension can be activated or deactivated manually in the R&S FSW base
unit (I/Q Analyzer application), it is activated automatically in some applications that
also support I/Q data analysis. See the application-specific documentation for details.
Instrument Tour
To Next Page
Loading...
Need help?
General
