R&S FSW Series User Manual

Network and Remote Operation
R&S
®
FSW
790User Manual 1173.9411.02 ─ 43
Compatibility with former R&S signal and spectrum analyzers
As a rule, the R&S FSW supports most commands from previous R&S signal and
spectrum analyzers such as the FSQ, FSP, FSU, or FSV. However, the default values,
in particular the number of sweep points or particular bandwidths, may vary. Therefore,
the R&S FSW can emulate these other devices, including their default values, in order
to repeat previous measurements or support existing control applications as in legacy
systems.
The required settings are configured in the "Compatibility" tab of the "Network
+Remote" dialog box.
Language.................................................................................................................... 790
IF Gain........................................................................................................................ 791
Sweep Repeat.............................................................................................................791
Coupling......................................................................................................................791
Wideband....................................................................................................................792
FSU/FSQ Preamplifier................................................................................................ 792
HP Additional.............................................................................................................. 792
Revision String............................................................................................................792
Resetting the Factory Revision................................................................................... 792
Language
Defines the system language used to control the instrument.
For details on the available GPIB languages, see Chapter 14.13.2, "Reference: GPIB
Commands of Emulated HP Models", on page 1334.
Note: Emulating previous R&S signal and spectrum analyzers. This function is also
used to emulate previous R&S signal and spectrum analyzers.
Network and Remote Control Settings

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English