R&S FSW Series - Page 911

Remote Commands
R&S
®
FSW
911User Manual 1173.9411.02 ─ 43
Manual operation: See "Generator Notch State" on page 225
CONFigure:GENerator:NPRatio:NOTCh<notch>[:STATe] <NotchState>
Enables or disables the specified notch on the signal generator.
Suffix:
<notch>
.
1..n
Parameters:
<NotchState> ON | OFF | 0 | 1
OFF | 0
The notch is not considered for signal generation on the connec-
ted signal generator.
ON | 1
The notch is considered for signal generation on the connected
signal generator.
*RST: 0
Example:
CONF:GEN:NPR:NOTC2:STAT ON
Manual operation: See "Generator Notch State" on page 225
CONFigure:GENerator:NPRatio:NOTCh<notch>:CLOCk?
Queries the generator clock frequency.
Suffix:
<notch>
.
1..n
irrelevant
Return values:
<ClockFrequency>
Example:
CONF:GEN:NPR:NOTC:CLOC?
Usage: Query only
CONFigure:GENerator:NPRatio:NOTCh<notch>:COUNt:CSTate?
Queries the state of the number of notches.
Suffix:
<notch>
.
1..n
irrelevant
Return values:
<ControlState> OFF | SUCCessful | ERRor
OFF
Signal generator control off
SUCCessful
Setting successfully applied on the signal generator
Configuring and Performing Measurements