R&S FSW Series - Page 912

Remote Commands
R&S
®
FSW
912User Manual 1173.9411.02 ─ 43
ERRor
Control error, for example because a specified value cannot be
applied on the signal generator
Example:
CONF:GEN:NPR:NOTC:COUN:CST?
Usage: Query only
Manual operation: See "Number of Notches" on page 224
CONFigure:GENerator:NPRatio:POWer:LEVel:CSTate?
Queries the state of the generator power level.
Return values:
<ControlState> OFF | SUCCessful | ERRor
OFF
Signal generator control off
SUCCessful
Setting successfully applied on the signal generator
ERRor
Control error, for example because a specified value cannot be
applied on the signal generator
Example:
CONF:GEN:NPR:POW:LEV:CST?
Usage: Query only
Manual operation: See "Level (RMS)" on page 230
CONFigure:GENerator:NPRatio:POWer:LEVel:OFFSet:CSTate?
Queries the state of the generator level offset.
Return values:
<ControlState> OFF | SUCCessful | ERRor
OFF
Signal generator control off
SUCCessful
Setting successfully applied on the signal generator
ERRor
Control error, for example because a specified value cannot be
applied on the signal generator
Example:
CONF:GEN:NPR:POW:LEV:OFFS:CST?
Usage: Query only
Manual operation: See "Level Offset" on page 230
Configuring and Performing Measurements