R&S FSW Series User Manual

Measurements and Results
R&S
®
FSW
230User Manual 1173.9411.02 ─ 43
Frequency
Defines the frequency of the signal provided by the signal generator.
If the Generator Frequency Coupling State is active, this value is read-only and indi-
cates the resulting frequency setting on the generator.
Remote command:
CONFigure:GENerator:FREQuency:CENTer on page 906
CONFigure:GENerator:NPRatio:FREQuency:CENTer:CSTate? on page 908
Level (RMS)
(Default:) The specified power level is used for the output power by the connected sig-
nal generator.
Remote command:
CONFigure:GENerator:POWer:LEVel on page 914
CONFigure:GENerator:NPRatio:POWer:LEVel:CSTate? on page 912
Level Offset
Defines a fixed offset in the power level used by the generator, for example due to a
gain from the DUT.
Remote command:
CONFigure:GENerator:POWer:LEVel:OFFSet on page 914
CONFigure:GENerator:NPRatio:POWer:LEVel:OFFSet:CSTate? on page 912
Reference Frequency
Selects the source of the generator reference frequency.
The internal reference is that of the signal generator itself.
An external reference is provided via the EXT connectors on the generator, for exam-
ple by the R&S FSW.
Remote command:
CONFigure:GENerator:EXTernal:ROSCillator on page 906
CONFigure:GENerator:NPRatio:EXTernal:ROSCillator:CSTate?
on page 907
Standard
For reference only: the standard currently used by the signal generator. If no standard
is defined on the generator, notched signals are not available (see "Generator Notch
Filter State" on page 224).
Remote command:
CONFigure:GENerator:NPRatio:BB:STANdard? on page 907
ARB Waveform File
For reference only: the ARB waveform file currently used by the signal generator.
Remote command:
CONFigure:GENerator:NPRatio:BB:ARBitrary:WAVeform:SELect?
on page 906
Noise Power Ratio (NPR) Measurement

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English