R&S FSW Series - Page 907

Remote Commands
R&S
®
FSW
907User Manual 1173.9411.02 ─ 43
Manual operation: See "ARB Waveform File" on page 230
CONFigure:GENerator:NPRatio:BB:STANdard?
Queries the standard currently used by the signal generator.
Return values:
<Standard>
Example:
CONF:GEN:NPR:BB:STAN?
Usage: Query only
Manual operation: See "Standard" on page 230
CONFigure:GENerator:NPRatio:CONNection:CSTate?
Queries the state of the connected signal generator and its availability for the Spectrum
application.
Return values:
<ControlState> OFF | SUCCessful | ERRor
OFF
No signal generator defined
SUCCessful
Connection established to compatible generator
ERRor
Connection error, for example due to an incompatible generator
Usage: Query only
CONFigure:GENerator:NPRatio:CONTrol[:STATe] <State>
Activates or deactivates control of the signal generator by the R&S FSW.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST: 0
Example:
CONF:GEN:NPR:CONT:STAT ON
Manual operation: See "Generator Control State (FSW -> SMW)" on page 229
CONFigure:GENerator:NPRatio:EXTernal:ROSCillator:CSTate?
Queries the state of the generator reference frequency.
Return values:
<ControlState> OFF | SUCCessful | ERRor
Configuring and Performing Measurements