Ruijie RG-S2600G-I Series User Manual

CLI Reference BFD Configuration Commands
Platform
Description
N/A
bfd all-interfaces
Use this command to configure the BFD for the OSPF or the RIP protocol on all interfaces in router
configuration mode. Use the no form of this command to disable this function.
bfd all-interfaces
no bfd all-interfaces
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
By default, BFD can not be configured for the OSPF or the RIP protocol on the interface.
Command
Mode
Router configuration mode
Usage Guide
Use the following two methods to enable or disable the BFD configuration for the OSPF or the RIP
protocol on the interface:
1. Use the bfd all-interfaces or the no bfd all-interfaces command in the OSPF or RIP router
configuration mode;
2. Use the ip ospf bfd [ disable ] or ip rip bfd [ disable ] command in interface configuration mode.
Configuration
Examples
The following example shows how to configure the BFD for OSPF on all interfaces:
Ruijie(config)# router ospf 123
Ruijie(config-router)# bfd all-interfaces
Related
Commands
Command
Description
bfd
Configure the BFD session parameter.
ip ospf bfd
Configure the BFD for OSPF.
ip rip bfd
Configure the BFD for RIP.
Platform
Description
N/A
bfd bind backward-lsp-with-ip
This command is used to configure the BFD for MPLS, and please see the MPLS-CREF.doc.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English