CLI Reference RNS&Track Configuration Commands
RNS&Track Configuration Commands
delay
Use this command to specify a period of time after which the track object status will change if the
interface status changes.
delay { up seconds [ down seconds ] | [ up seconds ] down seconds }
Set the delay time.
The unit is second.
Track configuration mode.
The continual oscillation of the track object status may cause its client to change as well. This
command can be used to delay advertising the change of the track object status. For example, the
status of a track object changes from up to down, if the delay down 180 command is configured, the
down status will be advertised after 180 seconds. If the track object status changes to the up again in
this period, it will not be advertised. For the client of the track object, the status of the track object is
always up.
Delay 30 seconds to advertise after the track object status changes from down to up.
Ruijie(config-track)# delay up 30
dns word name-server a.b.c.d
Use this command to set an iprns object to send the dns packets and to enter the ip rns dns mode.
dns word name-server a.b.c.d
To Next Page
Loading...
Need help?
General