CLI Reference RNS&Track Configuration Commands
Set the timeout time, in ms.
By default, the timeout time of sending the icmp echo packets is 5s; the timeout time of sending the
dns packets is 9s.
ICMP echo configuration mode/DNS configuration mode.
Use this command to configure the timeout time for packets. If no packets are received within this
period of time, the device will regard that no response packets are received.
Set the interval of sending the packets.
track interface line-protocol
Use this command to configure a track object to track the interface status and enter the track mode.
The no form of this command is used to delete a track object.
track object-number interface type number line-protocol
Set the track object number, in the range of 1 to 700.
Set the interface type and the interface number.
Global configuration mode
Use this command to configure a track object to track the link status of the interface. If the link status
of the interface is up, the status of the corresponding track object is up too.
Ruijie(config)# track 3 interface ethernet 0/1 line-protocol
To Next Page
Loading...
Need help?
General