CLI Reference GRTD Configuration Commands
show diagnostic events
Use this command to display all event information generated by GRTD.
show diagnostic events [slot slot_id [sub_system subsys_id]]
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
This command has no default setting.
Use the show diagnostic events command to display all event
information generated by GRTD.
Example 1: Use the show diagnostic events command to display
the following:
ruijie# show diagnostic events slot 3/0
Diagnostic events <storage for 500 events, 1 events
recorded>
Event Type (ET): I - Info, W - Warning, E - Error
Time Stamp ET Slot Event Message
------------------- -- ----
--------------------------
2012-06-15 16:34:39 I 3/0 Diagnostic Pass
Ruijie#
diagnostic event-log size
Set the number of event records.
To Next Page
Loading...
Need help?
General