Ruijie RG-S2600G-I Series - Page 1084

CLI Reference SEM Configuration Commands
_snmp_oid_val
Actual SNMP OID value
Examples
The following example configures to monitor snmp oid
1.3.6.1.2.1.2.2.1.10.1. If the value is larger than 10000, a log is
generated.
Ruijie(config)#intelligence manager applet Test_1
Ruijie(config-applet)#event tag monitor_snmp snmp oid
1.3.6.1.2.1.2.2.1.10.1 get-type exact entry-op ge entry-val "10000"
entry-type value poll-interval 5
Ruijie(config-applet)#action 00 syslog msg "$_snmp_oid out of range"
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
Platform
description
N/A
event snmp-notification
This command is used to configure a monitor of SNMP Traps in SEM configuration mode. The
no form of this command is used to delete an event with the specified name.
event tag event-name [correlate {andnot | and | or}] snmp-notification oid oid-string oid-val
comparison-value op operator [skip {yes | no}]
no event tag event-name
Parameter
description
Parameter
Description
event-name
The event name.
correlate { andnot |
and | or }
The relation between the current event and
the combination of the previous events in the
case of multiple events (optional). The
values are and, or, and andnot.
oid oid-string
The monitored OID
oid-val
comparison-value
The reference value for monitoring
op operator
The comparing method
skip {yes | no}
Indicate whether to skip the snmp trap. If it is
set to yes, the patterned snmp trap will be