Ruijie RG-S2600G-I Series - Page 1101

CLI Reference SEM Configuration Commands
commands
show smart
manager
environment
Show the global environment variable.
smart manager history
In the global configuration mdoe, use this command to configure the maximun number of SEM
history information to be saved. The no form of this command is used to restore it to the default
value.
smart manager history size events size
no smart manager history size events
Parameter
description
Parameter
Description
events
Set the maximum number of SEM history
information to be saved.
sizes
Set the specified number, its the maximum value
is 50 and default value is 50 also.
Default
configuration
50.
Command
mode
Global configuration mode
Usage
Guideline
Caution
Try not to set the maximum value to 0. if so, the SEM
will not record the histoty information.
Examples
The following example sets the maximum saved number of SEM Even
history information to 30:
Ruijie(config)#smart manager history size events 30
Related
commands
Command
Description
show smart
manager history
events
Show the event history information.