Ruijie RG-S2600G-I Series - Page 1102

CLI Reference SEM Configuration Commands
smart manager policy bootup-delay
In the global configuration mdoe, use this command to configure the bootup-delay of SEM
policies.
smart manager policy bootup-delay dealy-time
Parameter
description
Parameter
Description
delay-time
The interval ranges from the SEM policy is
available in the console to the SEM policy is
used, in the range of 60seconds-900seconds.
Default
configuration
60 seconds.
Command
mode
Global configuration mode
Usage
Guideline
N/A
Examples
The following example sets the bootup-delay to 120 seconds:
Ruijie(config)#smart manager policy bootup-delay 120
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
smart manager policy record
In the privileged mdoe, use this command to clear the CLI record generated by running the SEM
policy.
smart manager policy record clean [no-registed | policy registed-polciy-name | dir
record-directory | all]
Parameter
description
Parameter
Description
no-registed
Clear all CLI record directories of the policies
that have not registered in the SEM system.
policy
registed-policy-name
Clear the CLI record generated by the specified
registered policy.