Ruijie RG-S2600G-I Series - Page 1110

CLI Reference SEM Configuration Commands
delay delay-value
(optional) the policy delays running after being
triggered.
correlate-period
correlate-period-value
(optional) the time-out period of the
correlationship.
maxrun
maxruntime-number
(optional) the maximum time to run the policy.
Over this time, the policy will be forced to end.
It is 20 seconds by default.
Default
configuration
By default, the trigger is not configured.
Command
mode
SEM mode
Usage
Guideline
N/A
Examples
The following example specifies the policy named Test_1 to run with 10
seconds delay after being triggered.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag none-event none
Ruijie(config-applet)#trigger delay 10
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
show smart manager detector
In the privileged EXEC mode, this command shows the monitor information
show smart manager detector [all |detector-name] [ detailed | statistics]
Parameter
description
Parameter
Description
all | detector-name
(optional) show all monitor information or show
the specific monitor information.
detailed
(optional) show the detailed information.